Products
Machine tool accessories
CNC Collet Chuck System
$825-$855
Adapt your three jaw power chuck into a precision collet closer.
The Nub Tools CNC Collet Chuck System is for 6,8,10, and 12 inch CNC power chucks. A cost effective and efficient alternative to a standard collet chuck that eliminates the need to remove your chuck from the machine. This system provides a positive stop-dead length for repeatable part lengths. Installation is as fast and easy as installing a set of soft jaws.The ability to go from working with standard jaws to running collets in just minutes will sky rocket your shop’s productivity.
Gang Tool Holder
$475
Turn your turret lathe into a gang tool machine.
- Hold up to three tools at one time
- Spot, Drill, and Tap from a single tool pocket!
- Keep your repeat job tools pre-set in your tool box for fast future set ups
- Available in a 1″ and 3/4″ shanks
- Accepts 3/4″ tools
Center Drill Holder
$309.70–$333.85
Squeeze inbetween your talistock and shaft with ease.
The Nub Tools Center Drill Holder is a square shank tool holder that will allow you to get into the narrow space between the end of the part and the tail stock of your CNC lathe. The Center Drill Holder’s additional benefits:
- Is not limited to combined drills alone. Center/spotting drills, counter sinks, drills, and boring bars etc. may be use.
- Frees up drill chucks and collet holders on your tool turret.
- Allows you to utilize unused turning tool pockets on your turret.
- Increases tooling arrangement flexibility.
- Can be used on manual and CNC tool room lathes.
Offered in 1″ and 3/4″ Shanks: Max Center drill Dia. 1/2″ Your Center Drill Holder Kit Includes
- Tool holder & wrench
- 6 Reducer Bushings
- 1/8
- 3/16
- 1/4
- 5/16
- 3/8
- 7/16
Vise Parallel Keepers
$59.95
Hold your vise parallels down tight!
- Stainless Steel Springs
- No max vise opening
- Low Profile
- Collapsible
Harley-Davidson Tools
HARLEY-DAVIDSON OVERHEAD VALVE SPRING COMPRESSOR COMPLETE KIT
$149.95
Everything you need for on or off the bike service.
Get everything you need to save time and money with this complete valve spring compressor kit. You will be able to remove and replace your valve springs both on the bench and on the bike. The user-friendly design allows for a much more enjoyable and profitable valve spring removable experience. Fits Harley Evolution and Twin-Cam engines. Complete kit includes:
- Base model kit
- On the bike valve spring removal kit
- Beehive spring reducer
HARLEY-DAVIDSON OVERHEAD VALVE SPRING COMPRESSOR
$109.95
Bench top spring removal made easy.
Experience the simple and user friendly functionality of this amazing spring compressor. The Nub Tools overhead valve spring compressor makes removing and installing valve springs a breeze by providing quick setup, fast compression, secure operation and leaves the valve keepers fully exposed. Fits Harley Evolution and Twin-Cam engines with straight and beehive style springs. The Beehive Valve Spring Reducer is now included!
BEEHIVE SPRING REDUCER
$19.95
Replacement item only.
Now comes included in all tool kits. Beehive spring reducer. Provides the proper secure fit for conical style springs.
ON THE BIKE SPRING REMOVAL KIT
$39.95
Upgrade your basic valve spring compressor kit.
Perform service on the bike without removing the cylinder heads. Kit includes:
- Stub multi-fit seal drive
- Cylinder pressurizing hose with 12mm and 14mm threads.
Convenient Store
Wera Hex-Plus Multicolor L-key Set
$58.00
9-piece set Application: Hexagon socket screws Design: BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the color-coded sleeves mean that it is easy to recognize the correct sizes and this makes it simpler to find the right tool. Tip: Hex-Plus, ball-end hexagon on long arm Imperial (Standard) Set – Comes in a robust belt pouch. Sizes included: Units-inch 5/64″ 3/32″ 1/8″ 5/32″ 3/16″ 7/32″ 1/4″ 5/16″ 3/8″ Metric Set – Comes in a wear-resistant clip for enhanced durability. Sizes included: Units-millimeters 1.5 2 2.5 3 4 5 6 8 10
Wera Screwdriver Set and Rack
$65.64
6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping. More torque can be transferred with the help of an open-end or ring spanner applied to the hexagonal blade and the integrated bolster. “Take it easy” Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Including a practical rack for tidy storage of the screwdrivers. Set includes: Phillips Head 1 x PH 1 x 80 1 x PH 2 x 100 Flat Head 1 x 0.6 x 3.5 x 75 1 x 0.8 x 4.0 x 90 1 x 1.0 x 5.5 x 100 1 x 1.2 x 6.5 x 125
Wera Torx HF Screwdriver Set and Rack
$60.70
7-piece screwdriver set for TORX® screws. Multi-component Kraftform handle for fast and low-fatigue working. Comes with holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Set includes: TORX 1 x TX 8×60 1 x TX 10×80 1 x TX 15×80 1 x TX 20×100 1 x TX 25×100 1 x TX 27×115 1 x TX 30×115
Wera Torx Screwdriver
$7.08
High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. “Take it easy” Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.